Menu
Royal Blue Overdrive offers a wide range of tones from light overdrive into distortion and at lowest Distortion knob setting works as an EQ. It can also be used to create tube amp-like crunchy ‘strike hard for distortion’ effect. There is not much filtering on the overdrive, to provide a transparent tone that you can tailor with both the Treble and Bass controls. Like the best boutique amps, the Royal Blue OD lets you determine the amou
€ 169.00

Royal Blue Overdrive offers a wide range of tones from light overdrive into distortion and at lowest Distortion knob setting works as an EQ. It can also be used to create tube amp-like crunchy ‘strike hard for distortion’ effect. There is not much filtering on the overdrive, to provide a transparent tone that you can tailor with both the Treble and Bass controls.

Like the best boutique amps, the Royal Blue OD lets you determine the amount of breakup by how hard you strike the strings with your pick, and/or by adjusting the volume knob on your guitar. The Royal Blue can add this level of expressiveness to any clean or slightly overdriven amplifier.

The Royal Blue Overdrive is an overdrive pedal with a transparent and dynamic tone and feel.

The Royal Blue Overdrive gives you many potentials from light overdrive to heavy distortion. The overdrive is very dynamic, allowing you to experience the break-up effect of a tube amp by playing louder or softer through the pedal. The bass and treble controls allows you to adjust the tone completely to your own taste.

The royal blue in a clean amp makes it possible to experience earlier break-up to a slight overdrive. If the amp already has a slight overdrive, the royal blue will increase expressiveness and it will keep the dynamics. This overdrive pedal reacts also very well to your volume knob on the guitar.

A straightforward overdrive pedal that does exactly what it is supposed to do. Lots of feel and tone.

Voor alle info: Klik hier

CONTROLS

  • VOLUME: Sets the overall output level of the pedal.
  • DISTORTION: controls distortion, for most dynamic response set where the amount of distortion is controllable with picking force.
  • TREBLE: A boost/cut “shelving” type equalizer that controls the amount of high-end, operating where the Presence control is on most amplifiers. Treble can be used to add shimmer to even bright amplifiers without interfering with a typical treble boost of most amplifiers.
  • BASS: A boost/cut shelving type equalizer that controls the low end, just above resonance of a standard 4×12 cabinet. With both Bass and Treble turned up, you can get a scooped heavy tone; turn the knobs down for soft mid-boost tone.


SETTINGS

  • For Midboost: set Treble and Bass fully CCW.
  • For Midcut: set Treble and Bass fully CW.

ELECTRICAL SPECIFICATIONS

  • Current draw: 3.5mA at 9V DC
  • Input impedance: 140K
  • Output impedance: 25K
  • Voltage range: 7.5-12V’s


POWER REQUIREMENTS

  • 6F22 9V battery or DC eliminator 2.1 mm plug center negative and positive sleeve.